Click image to view full size image
The cooling tower Water pvc Drift Eliminators system's function is to separate the liquid droplets contained in the vertical or horizontal air flows, and it could reduce the working fluid loss. If drift droplets contain the chemical and particulate matter, it could also reduce the detrimental effects on surrounding equipment and the environment by decreasing the drift droplets. LATINO's cooling tower Water pvc Drift Eliminator are specifically designed to achieve maximum drift removal efficiency in both cross flow and counter flow tower applications with various product options available to minimize pressure drop, drift loss, cost, or a combination of all above three aspects.
The water eliminator is generally composed of one or two rows of slats arranged at an angle or with curved blades, and there are also three layers of slats. The characteristics of using plastic diagonal staggered plate as water remover are: light weight, low resistance, and good water removal effect. When using slats, the width of the slats is at an angle of 45°~70° with the direction of air flow, and the upper and lower layers of slats are arranged at opposite angles.
Due to the small airflow velocity and high tower in the tower cooling tower, there are fewer water droplets carried out by the airflow, so in order to reduce the ventilation resistance, there is generally no water eliminator. The open cooling tower is a louver at the air inlet to take on the role of the water eliminator. Dehydrators are installed in almost all mechanically ventilated cooling towers.
In the case of water distribution using rotating distribution pipes, a water baffle is installed on the arm of the distribution pipe instead of a water eliminator. In the mechanical ventilation counterflow cooling tower, when the tubular water distribution system is adopted, the water eliminator is installed on the water distribution pipe; When using trough water distribution, the water eliminator can be arranged in the middle of the distribution tank or in the upper space of the tank. In the cross-flow cooling tower, the transverse vertical arrangement of louvers is generally used as the water eliminator, in addition to the water removal effect, in the cross-flow tower also has the role of air conduction. Generally installed in small and medium-sized cross-flow towers, because the plate distance of this vertical louver type water eliminator is smaller and the lower part is larger, so the airflow of the upper and lower parts of the packing can be better balanced.
The cooling tower Water pvc Drift Eliminator remover is set in the cooling tower, which is used to remove the floating device in the airflow of the tower. It is widely used in spraying and fog, so as to remove water, prevent the untreated clean waste gas from flowing out quickly, and enhance the purification treatment effect.
Cooling tower Water pvc Drift Eliminator Main Advantages
Reduced environmental impact
Low working fluid and recoverable
Easy installment,maintenance
Resistant against almost all chemical and biological agents
https://www.latinocooling.com/